ULT Serie

Description;

• Ultra low freezers have net volume of 280, 470 and 730 liters as vertical and 267 liters as horizontal.
• The temperature set value can be adjusted the range of -50°c and -86°c on the device's screen.
• The device roll out from our factory by being set to -86°c.
• The inner surface of the device is made of cr-ni alloyed stainless steel material. The outer surface is made of sheet material painted with antibacterial electrostatic powder paint.
• The thermostat which sends data to the control panel of the device, measures with sensitivity of 0.1°c.
• The inner cabin is cooled by the static direct cooling method with the cooling pipes surrounding the cabin.
• The device has cascade cooling system.
• The temperature/time graph of the last 140 minutes can be seen on the screen of the device.
• The device has usb port for recording temperature data. 30 days of temperature data can be recorded to usb memory.
• Pt100 temperature sensor is used in the device.
• 12 cm polyurethane foam is used for good insulation in the device.
• There are two sealing gaskets in order to improve the insulation on the door part of the device.
• Insulating material covers are used in the cubicle of the device, so that the temperature in the cabin does not rise too much when the door of the device is opened.
• Covers with insulating material are used in the cell of the device so that the temperature inside the cabinet does not rise too much when the door of the device is opened.
• The device is microprocessor controlled.
• Every step is done with encryption method in order to prevent unauthorized people from using the device.
• There are 2 free wheels and 2 stoppers wheels for easy transport of the device.
• There is an automatically charged accumulator system on the control panel of the device. This system ensures that the digital control panel continues to operate for 72 hours in case of power failure.
• The device gives warning with visual and audible warning signals when the upper and lower temperature limits are exceeded, when the door of the device is left open, when

there is a power cut or low voltage problem while the ultra low freezers are operating. It sends the error codes to the screen, the thermal printer and the files received from the usb.

• Our devices are produced in accordance with the CO2 (Carbon Dioxide Back UP) system.

Technical data;